How to Fix Wi-Fi Problems on Windows 11 and 10 - Troubleshooting Guide
16 Nov 2026

How to Fix Wi-Fi Problems on Your PC (Windows 11 and 10)


Windows is normally happy to hold a Wi-Fi connection, so when your desktop disconnects, it's rarely your broadband line that's at fault. That video that guides you through fixing Wi-Fi on Windows 11 and 10 after a new PC build  tells you everything you need to know about how often your Wi-Fi issues are actually down to your own adapter or driver.


What follows is a handy work order of troubleshooting how to fix Wi-Fi problems, working from low effort fixes and thirty-second check ups to fixes that require device manager and command prompt.


How Do I Fix My Wi-Fi Connection on My PC?


Begin troubleshooting with the simplest, least intrusive solutions, since most wifi connection problems resolve by the first or second step. Windows offers a Network & Internet troubleshooter that examines the adapter, DHCP lease, and DNS settings, and performs automatic repairs, making it a good initial step before adjusting drivers.


If restarting both the router and PC resolves the problem, it indicates a temporary network-side glitch rather than an issue with your device.


Which quick checks should you run first?


1. Test airplane mode and the Wi-Fi switch. Both Windows 11 and Windows 10 have a wireless quick settings tile – in Windows 11 it's in quick settings, in Windows 10 it's in the Action Centre. It is very easy to accidentally turn this off, and spend some time checking out other more complex explanations.

2. Turn the router back on, then the PC. Restarting the router will release any stuck DHCP lease, restarting the PC will reset the state of the card. This often fixes most "wifi not working" complaints.

3. Run the Network & Internet troubleshooter. Open Settings > System > Troubleshoot > Other troubleshooters. Windows will be able to diagnose and repair a broken DNS entry or disabled network adapter automatically.

4. Disable and enable your adapter. Open the Run window (Windows + R), then type ncpa. Cpl. Locate your Wi-Fi adapter, right-click it and select disable, then enable it again. This will cause your device to create a new connection to the access point.


If none of these do anything, it is probably below the windows settings layer, which is covered next.


Wi-Fi Not Working After the Basics? Repair the Driver and Network Stack


If these simple fixes don't work, the likely suspect will be in the wireless driver or Windows network stack. A driver that Windows Update quietly installed is often the suspect on a desktop, mainly following a feature upgrade. These 'more complicated' fixes are much more time-consuming but fix most residual wifi connection problems.


Troubleshooting


How do you repair a stubborn connection?


1. Update the driver from the vendor. Find your chipset (Intel, Realtek, Qualcomm, Atheros or Broadcom) and download the driver from the support page of your motherboard maker. Generic driver packs always install the wrong build.

2. Reinstall it cleanly. Select it in Device Manager, expand Network adapters, right-click the Wi-Fi card, and choose Uninstall device. Restart and Windows will install a fresh copy.

3. Scan for hardware changes. In Device Manager, click Action, then Scan for hardware changes. This will re-detect a PCIe or USB card that has disappeared from the bus.

4. Reset the network stack. Open Command Prompt as an administrator and type, netsh winsock reset and netsh int ip reset and ipconfig /flushdns. Reboot after the commands are complete.


Driver work is the distinction between a temporary patch and a permanent repair that persists across the next reboot.


My PC Does Not Show Wi-Fi at All


The Wi-Fi icon is nowhere to be seen in the taskbar. The Wi-Fi adapter is disabled, driver is not installed or there is no Wi-Fi hardware present. That happens quite often on desktops where the Wi-Fi adapter is not soldered to the motherboard.


What does "Wireless capability is turned off" mean and how do you fix it?


That message indicates the radio has been turned off at some level, not that the card has passed away. Start by turning Airplane mode off and then launch Device Manager to ensure the adapter is turned on.


For boards with built-in Wi-Fi, locate a Wireless LAN or WLAN Radio entry in the BIOS or UEFI and ensure it is not turned off. If the card always was in Device Manager or BIOS, it stopped working or was never installed.


Why Is My Wi-Fi Working on My Phone but Not My PC?


This is the best diagnostic question you can ask. If the phone connects fine, the router and the broadband line are working fine, and the fault is on the desktop: its adapter, its driver, its saved profile, or just where the desktop is in the room.


Does your desktop actually have a Wi-Fi card?


Many desktop motherboards support only Ethernet, so a computer built without a wireless card will never display a Wi-Fi option, regardless of how many drivers you reinstall. If you are limited to a wired connection, using an USB Wi-Fi adapter or a PCIe wireless card is the solution; both typically cost well under ₹2,000 in India.


The IT Gear offers networking hardware of this type, which is worth exploring before deciding the machine is beyond repair. Another possibility is a band or security mismatch: a 2.4 GHz-only adapter cannot detect a 5 GHz-only network, and a card that supports only WPA2 will not connect to a WPA3-only router.


Why Does My PC Keep Kicking Me Off the Internet?


Drops that occur at the same intervals, disabling every second device, are almost always power management or profile related. Windows is allowed to turn the adapter off to save power, and on a desktop, this is allowed to disable the connection while it is idle.


Why is my computer not connecting to the internet even though I have internet?


That wording typically refers to a link that links fine but offers no traffic, which indicates DNS or IP issues instead of the radio. Run ipconfig /release as well as ipconfig /renew to press a brand-new address, flush DNS and check a public resolver such as 8.8.8.8. Conversely, open up the adapter's Buildings, most likely to Power Management and also clear "Allow the computer to turn off this device to preserve power", then neglect and re-add the network to clear a persistent profile.


Final Checklist for Fixing Wi-Fi Problems

  • On airplane mode as well as the Wi-Fi toggle.
  • Both the PC and the router have been restarted.
  • The troubleshooter ran and nothing has been reported.
  • The adapter has been turned off and on again.
  • The wireless driver is up-to-date and has been reinstalled cleanly.
  • Adapter power saving is disabled.


The three reasons desktop Wi-Fi dies are just as common: radio's been disabled, a driver has malfunctioned, or there's no hardware. Going through the process above takes around 20 minutes and will identify which of these issues you're working with. If it's hardware, The IT Gear stocks all the adapters and networking hardware needed to get your PC back to functioning.


Frequently Asked Questions


My computer isn't connected to the internet on Windows 11. How is that different from Windows 10?


The same repair, just the path to get there is different. They both have Network within Settings but Windows 11 has under Settings, then Network & internet, then Advanced network settings and Windows 10 has just under Network and Internet, then Status.


Can I repair Wi-Fi on a new build with no web connection to fetch drivers?


Yes, either through an USB stick on a secondary device that can download the WLAN driver or temporary usage of a phone's USB tethering to get on the net to install the driver from the vendor page of the motherboard.


How do I know if it's the PC or the router that is the issue?


Test a second device on the same SSID. If it connects, the router is OK and it's a PC issue; if nothing connects, reboot the router then do the desktop.


4
Google
★★★★★
4.8 out of 5
×
Need Assistance?