LI LANCOOL 215 X MID TOWER COMPUTER CASE I SUPPORT E-ATX/ATX/M-ATX/ITX MOTHERBOARD I 2 X 200 MM ARGB FAN FRONT I 1 X 120 MM FAN REARLIAN
- The included fan hub can provide additional power to 3 additional fans and 1 additional ARGB device.
- The 22mm thick space on the back of the motherboard ensures that the cables fit snugly.
- The back of the motherboard tray includes rubber grommets around the motherboard and cable tie points, Velcro straps, simplifying cable management.
- Fits motherboards with a maximum width of 280mm.
- Motherboard: E-ATX (Width: Below 280mm)/ATX/M-ATX/ITX
- Fan Support: Front: 2 x 140 mm or 3 x 120 mm Top: 2 x 120 mm or 2 x 140 mm Top of PSU Room: 2 x 120 mm
- I/O Ports: Power Button Reset Button LED Button 1 x HD Audio 2 x USB 3.0 for Lighting Mode Control
1 in stock
OPTIMIZED THERMAL MANAGEMENT
Mesh intakes spanning the front panel guarantee sufficient airflow in and out of the system.
Pre-installed fans ensure the case runs at peak performance.
The honeycomb vent design at the top, rear, and above the PSU chamber guarantee an abundant airflow is delivered to the interior components, optimizing the thermal management.
Ultimate cooling system scenario
With two 200MM fans mounted outside of the frame, you still have enough room to front mount a 360 AIO radiator to benefit from the ultimate cooling scenario. Don’t worry about the fan screws, they won’t interfere with the radiator.
STUNNING PC ILLUMINATION
Move air stylishly with ARGB effects
Two 200MM fans are equipped with LED lights which create a dazzling effect through the mesh panel.
The LIAN LI logo glows in sync with the fans.
Experience ARGB control via one button
The LED button located on the top controls 8 lighting modes and 7 colors through a simple click.
ARGB synchronization with the motherboard
Pressing the LED button 3 seconds passes over the control of the LED lights to the motherboard, and press the button 3 seconds again to regain control of the lights.
Pre-installed fan hub
The included fan hub can provide extra power to 3 additional fans and 1 extra ARGB device.
Plenty of space for cable management
The 22MM thick space behind the motherboard ensures the cables fit in well.
Keep the cable nice and neat
The rubber grommets around the motherboard and the cable tie points at the back of the motherboard tray, with included Velcro straps, simplify cable management.
E-ATX Motherboard Compatible
Fits motherboards with a maximum width of 280MM.
Removable/adjustable cage supports
2 x 3.5” HDD or 1 x 3.5” HDD + 1 x 2.5” SSD
SIMPLE DUST MANAGEMENT
The trendy mesh design at the front panel provides filtration for dust coming from outside the chassis. Moreover, the magnetic dust filter on the top and the removable full-length dust tray at the bottom protects the internal components from dust accumulation without impeding the airflow.
|Dimensions||(D) 462mm x (W) 215mm x (H) 482mm|
|Motherboard||E-ATX(width: under 280mm)/ATX/M-ATX/ITX|
|Materials||0.75mm SGCC (MB tray, and most of the interior)|
|4.0mm tempered glass (both sides)|
|Incl Fans||2 x 200MM 3-PIN 800 RPM ARGB fans (front)|
|1 X 120MM 3-PIN 1100 RPM Fans (rear)|
|Fan Support||Front: 2 x 140mm or 3 x 120mm|
|Top: 2 x 120mm or 2 x 140mm|
|Top of PSU chamber: 2 x 120mm|
|Radiator||Front: 1 x 280/360mm|
|Top: 1 x 240 / 280 mm|
|Drive||Behind MB Tray: 2 x 2.5″ SSD|
|Hard Drive Cage: 2 x 3.5″ HDD or 1 x 2.5″ SSD|
|I/O Ports||Power button|
|LED button for lighting mode control|
|1 x HD AUDIO|
|2 x USB 3.0|
|Dust Filters||1 x Top (magnetic), 1 x Bottom (tray)|
|NOTE||*Features, Price, and specifications are subject to change without notice|
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.